![]() ![]() I have not found any of the STM32duino code (including bootloaders) to work with these chips, whatever they are. I have tested my boards and the configuration bits at 0圎00FFFC0 are a match for Macbeth's when read using using ST-Link Utility, so the manufacturer as read from the chip is not ST if I understand correctly. While the discussion is about not being able to program STM32's with STlink, it turns out that the reason it doesn't work is because the CPUID was different than that which would be read from a genuine STM32 part. The link below, second page, has more on these boards. there may of course be versions of the chip with correct markings, not STM32) that that also don't work. I have concluded that while the boards were sold as STM32F103C8T6 system minimum boards and the chips are labelled as STM32F103C8T6, they are in fact something else with STM32 markings. Please use v1.7.I was have been having problems getting USB to work with recent STM32F103C8T6 system minimum boards, getting 'device not recognised' messages and 'device descriptor request failed' message in device manager (Win 10). Support for macOS has been dropped with v1.8.0. FreeBSD: Users can install from freshports.It provides the opportunity to handle and fix user-reported package issues directly within the project and is not redundant to any limitations deriving from external maintenance guidelines. Note: As packages distributed via the Debian and Ubuntu repositories differ from our self-maintained deb-package, we recommend to use the latter instead (see link below). We recommend to install stlink-tools from the package repository of the used distribution: However we suggest to move the unzipped application folder to C:\Program Files\ on 32-bit systems and to C:\Program Files (x86)\ on 64-bit systems (the toolset is 32-bit).Īlternatively one may compile and install from source as described in our compiling manual. The archive file can be unzipped to any desired location as it does not contain any hardcoded paths. Please ensure to select the correct version for your system (i686 or x86_64). stlink-gui - a GUI-Interface Īs of Release v1.6.1 stand-alone Windows binaries are made available (again) on the release page of the project.st-util - a GDB server (supported in Visual Studio Code / VSCodium via the Cortex-Debug plugin).st-trace - a logging tool to record information on execution.st-info - a programmer and chip information tool.On the user level there is no difference in handling or operation between these different revisions. on-board on some STM32 Nucleo boards (STLINK-V3E).stand-alone programmer (STLINK-V3SET, STLINK-V3MINI, STLINK-V3MODS).on-board on STM32L Discovery and STM32 Nucleo boards.transport layer: SCSI passthru commands over USB.There are four generations available on the market which are all supported by this toolset: It supports several so called STLINK programmer boards (and clones thereof) which use a microcontroller chip to translate commands from USB to JTAG/SWD. ![]() Stlink is an open source toolset to program and debug STM32 devices and boards manufactured by STMicroelectronics.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |